BROWSE BY TECHNOLOGY



RTC SUPPLEMENTS


PRODUCTS & TECHNOLOGY

VPX Test Backplane Eases Access to Signals

  • Page 1 of 1
    Bookmark and Share

VPX Test Backplane Eases Access to Signals

A 2-slot test backplane for VPX board developers and integrators is designed to the latest VITA 46 specifications. The backplane from Elma Bustronic allows the user to power up and test J1 fabric connections as they would be interconnected in the target application. Signals can be passed from one slot to the next via high-speed interconnecting cables, via signals introduced through the J1 fabric connector, or accessed on the J1 fabric connector using the test backplane’s SMA and SATA cable headers. The test backplane accepts 6U cards with the 3U size supported by use of a shelf divider. For convenience in attaching probes, the slot pitch is an extra wide 1.6”.   

VPX cards are usually developed together with a rear transition module that does not access the J1 fabric signals. In conventional designs, an engineer cannot probe these J1 fabric signals while using the device under test’s (DUT) rear transition module (RTM) to access other I/O signals. The Bustronic solution allows the primary J1 fabric signals to be accessed/connected without interfering with the use of an existing RTM designed for J2-J6 I/O connector signals. Further, custom backplanes are often required to interconnect the primary fabric signals between multiple VPX blades for a specific application. The VPX Test Backplane allows the user to interconnect two or more such blades before investing the time or expense of a custom VPX backplane.

Additional 2-slot Test Backplanes can be used in a larger chassis to interconnect the J1 primary fabric in any serial topology desired. The A channel input using SMA cables accepts up to 10 Gbit/s and the B, C, and D channel inputs using the SATA II connectors accept up to 3.125 Gbit/s. There are 8 power studs for VS1, VS2_A, VS2_B, VS3 and 4 GND as well as fastons for 3.3V, +/- 12V and VBAT. There are also two 5-pin IPMB headers for SMB-0 and SMB-1 Pricing starts under $1,500..  

Elma Bustronic, Fremont, CA. (510) 490-7388. [www.elmabustronic.com].