Two-slot OpenVPX Development Platform Supports 3U and 6U Cards

  • Page 1 of 1
    Bookmark and Share

A new two-slot VPX/OpenVPX test and development platform accommodates both 3U and 6U boards via a shelf divider. The new E-Frame Series Test Platform from Elma Electronic can connect multiple backplanes to efficiently simulate various fabric topologies, eliminating the need for costly custom backplanes and allowing high-speed signals to be passed from one slot to the next. The new E-Frame Series enables developers to power up one or more VPX blades under test and interconnect the J1 fabric connections to emulate the user’s application. Signals from an external device can also be introduced through the J1 fabric connector or accessed on the J1 fabric connector using the provided SMA and SATA cable headers. 

The use of a standard VPX RTM (rear transition module) plugged into the back provides access to the J0, J2, J3, J4, J5 and J6 connectors, while simultaneously accessing high-speed signals in the J1 connector, routed out the side of the backplane. Each slot’s J1 “A” channel is broken out into 16 SMA connectors and the “B”, “C” and “D” channels into four SATA2 cable headers (12 total per slot). Designed for ease of use, the test platform features a 1.6” card pitch that enables easy cable access to components on either side of the board under test. A built-in LED voltage monitor provides bus voltage compliance, and VNAs (vector network analyzers) and other probes can be used on the surface of the VPX card under test for enhanced testing capabilities. 

The new E-Frame Series measures 9U x 42 HP (8.4”) x 11.73” and weighs only 18 lbs. Located on the rear of the chassis, power input voltage is 97 VAC to 264 VAC auto-ranging and power input frequency is 47 Hz to 63 Hz. Total power consumption is 580W. The test platform operates from 0° to +50°C at altitudes of up to 6,000 feet. It withstands shock of up to 10 Gs at 11 ms and vibration to 1G at 10 Hz to 330 Hz in non-condensing humidity from 5 to 95%. Pricing is $6,200 in single unit quantities.

Elma Electronic
Fremont, CA.
(510) 656-3400.