BROWSE BY TECHNOLOGY










RTC SUPPLEMENTS


PRODUCTS & TECHNOLOGY

Cost-Efficient COM Express Type 6 Modules with Celeron CPUs

  • Page 1 of 1
    Bookmark and Share

MSC Embedded offers MSC C6B-7S modules with three different Celeron processors and integrated Intel HD Graphics. The Intel Celeron CPU 1047UE with 1.4 GHz has two cores and 2 Mbyte cache. The single-core Intel Celeron 927UE (1.5 GHz) integrates 1 Mbyte cache. Both processors have a thermal dissipation power (TDP) of 17W. The cost-efficient dual-core Intel Celeron processor 1020E is clocked with 2.20 GHz and has 2 Mbyte cache. The TDP is 35W. The Celeron modules integrate the Intel HM76 PCH chip set. Dual-channel DDR3 SDRAM modules (two SO-DIMM sockets) with a maximum storage capacity of 16 Gbytes can be plugged in.

According to the COM Express Type 6 specification, the MSC C6B-7S modules offer four USB 3.0 and USB 2.0 interfaces each. Besides the seven PCI Express x1 channels, the modules are equipped with a PCI Express graphics (PEG) x16 interface, HD audio and a Gbit Ethernet interface. For the connection of high-resolution displays, the modules allow for direct access to the digital display interfaces DisplayPort and HDMI with a resolution of up to 2560 x 1600 pixels. Data can be stored via four SATA II channels at up to 300 Mbyte/s or on a NAND flash SSD that can be optionally populated. An onboard plug for a speed-controlled fan on a special cooling solution permits the implementation of quiet systems for environments that are sensitive to noise. The platform runs under the operating systems Windows 7, Windows Embedded Standard 7, Windows 8 and Linux. The AMI UEFI firmware has been implemented on the boards. The cost-efficient dual-core 1020E-based module is priced at $305 for higher quantities.

MSC Embedded

San Bruno, CA.

(650) 616-4068.

[www.mscembedded.com].